Details
A reflection/backscattering probe with a built-in reference leg is a convenient solution for long-term measurements and experiments in which variation or instability in the spectral output of the light source is expected to affect the reflection spectrum.
Available in both premium- and lab-grade, these probes include a reference leg that splits off from the light source connector for monitoring your illumination (or reference) source via a second spectrometer.
Overview
- Probe design -- 6-around-1 fiber bundle design at probe end for sample measurements
- Setup -- 7-fiber leg connects to light source, single-fiber leg connects to spectrometer for best performance
- Reference leg -- one optical fiber splits off from the light source connector for reference monitoring (6-around-1 design)
- Probe type -- probe comprises Visible-NIR (400-2100 nm) fibers
Specifications
Subject to change depending on model type
Engineering:
- Fiber Core Size:
- 200 µm
- Length:
- 2 m
- Jacket:
- Silicone-coated steel monocoil
- Probe Ferrule Diameter:
- 6.35 mm (1/4″)
- Breakout:
- Midway point of assembly at 1 meter
- Buffer Materials:
- Polyimide
- Cladding OD:
- 10 µm
- Cladding OD Tolerance:
- ± 4 µm
- Connector:
- SMA 905
- Fiber Core Size Tolerance:
- ± 4 μm
- Long Term Bend Radius:
- 8 cm
- Maximum OD:
- 243 µm
- Numerical Aperture:
- 0.22 ± 0.02 (equivalent to an acceptance angle of 24.8° in air)
- Primary Buffer OD:
- 10 µm
- Primary Buffer OD Tolerance:
- ± 5 µm
- Probe Fiber Bundle:
- 6 illumination fibers around 1 read fiber
- Short Term Bend Radius:
- 4 cm
- Probe Ferrule Length:
- 76.2 mm (3″)
- Probe Ferrule Material:
- Stainless steel
Environmental:
- Operating Temperature:
- -65 to 300 °C
-
Options available
From $563.00
-
Options available
From $347.00