Skip to content

R400-ANGLE-UV

Item Code: R400-ANGLE-UV

$837.00

$837.00

Total Price

"All prices are shown in US$. Prices exclude tax, logistics, custom and trade tariffs."

Couldn't update

This product is not available to purchase online.
Please contact us for further details.

Details

An angled reflection probe works well for reflection and backscattering measurements of powders and dense solutions. It has the same 6-around-1 fiber bundle configuration as our standard reflection probes, but with a 30º angled window at a small distance from the fiber bundle tip. This serves to reduce specular reflection effects when the probe is immersed in powders or dense solutions, and allows the probe to maintain direct contact with those samples for consistent measurements.

Overview

  • Probe design -- 6-around-1 fiber bundle design at probe end
  • Angled window -- stand-off window at 30º allows direct contact with powders and solutions
  • Fiber type -- probe comprises UV-Visible (300-1100 nm) fibers
  • Core diameters -- 200 μm and 400 μm options

Angled-Reflection-Probe_NEW.jpg

Specifications

Subject to change depending on model type

Engineering:

Fiber Core Size:
400 µm
Jacket:
PVDF zip tube
Length:
2 m
Probe Ferrule Diameter:
6.35 mm (1/4″)
Breakout:
Midway point of assembly at 1 meter
Buffer Materials:
Polyimide
Cladding OD:
20 µm
Cladding OD Tolerance:
± 3 µm
Connector:
SMA 905
Fiber Core Size Tolerance:
± 8 μm
Long Term Bend Radius:
16 cm
Maximum OD:
487 µm
Numerical Aperture:
0.22 ± 0.02 (equivalent to an acceptance angle of 24.8° in air)
Primary Buffer OD:
20 µm
Primary Buffer OD Tolerance:
± 7 µm
Probe Ferrule Length:
76.2 mm (3″)
Probe Ferrule Material:
Stainless steel
Probe Fiber Bundle:
6 illumination fibers around 1 read fiber
Short Term Bend Radius:
8 cm

Environmental:

Operating Temperature:
-65 to 300 °C