Our multispectral imaging camera enables a range of applications including medical diagnostics, machine vision in process control, and safety and security. It is available in several configurations with resolution from 0.3MP (VGA) to 2MP, at frame rates up to 70 frames per second. Users can select from preconfigured 3-, 5- and 7-channel RGB-NIR cameras or configure a 3CCD camera with custom-specified filters for bands between 400-1100 nm.
The FD-1665 has Gigabit Ethernet output for independent control of exposure, gain and readout. Each sensor can be triggered automatically for simultaneous exposure or controlled separately via hardware or software. By mixing color and monochrome CCDs, 3-9 spectral bands can be captured simultaneously.
The FD-1665 is a highly customizable device, and our camera experts will work with you to develop the multispectral solution you need.
- Solid-state sensors – multiple size, resolution, and frame rate options
- Wavelength range – spectral sensitivity optimized for 400-1100 nm
- Compact and rugged enclosure – 4.6 x 3.5 x 4.3 in. (LWH)
- Lens focal length options – 14 mm to 1500 mm
- Precision – sub-pixel alignment through a single aperture lens
- Highly customizable – variety of sensors options and configurations available
If you select more than three bands, they will no longer be discrete. That’s because we use a color CCD instead of a monochrome CCD to increase the number of bands. As a result, the extra bands overlap and their centers can’t deviate from the original Red-Green-Blue bands in the Bayer CFA.
|Image Device||CCD sensors (see sensor table)|
|Pixel Depth||12-bit ADC|
|Sensors||Color (Bayer) and monochrome|
|Spectral sensitivity||400 nm – 1100 nm|
|Configurations||Multispectral, polarization, and high dynamic range (HDR)|
|Frame rate||Up to 70 fps|
|Digital interface||3x GigE (CAT 5)|
|Lens mount||Nikon F-mount|
|Lens focal length (fixed)||14 mm to 1500 mm|
|Image data format||Y8, Y16 (all models); RGB; YUV411; YUV422; 8-bit and 16-bit raw Bayer data (color models)|
|Video data format||8, 16, or 24-bit digital data|
|Electronic shutter||Automatic / manual / one-push modes, programmable via software 1µsec – 65sec|
|Gain selection||0dB to 24dB in 0.04dB increments|
|General purpose I/O port||12-pin Hirose GPIO connector|
|Voltage Requirement||8-32V, Hirose 12-pin GPIO connector trigger|
|Power consumption||10 Watts|
|Sensor Type||Sensor size (HxV pixels)||Optical size||Pixel size (microns)||Max FPS (at full res)|
|Sony ICX424||659 x 494||1/3”||7.4 x 7.4||70|
|Micron MT9V022||752 x 480||1/3”||6.0 x 6.0||60|
|Sony ICX445||1296 x 966||1/3”||3.75 x 3.75||32|
|Sony ICX285||1392 x 1040||2/3”||6.45 x 6.45||30|
|Sony ICX274||1628 x 1236||1/1.8”||4.4 x 4.4||28|